LUNIK Sealers · Protection and finish
LUNIK sealers protect, enhance durability and define the final finish of microcement systems and continuous coatings, ensuring resistant surfaces with high aesthetic value.
View technical data sheetContinuous surface with a mineral, uniform and elegant appearance.
Direct application without complex mixing and with a stable consistency.
High resistance to abrasion, impacts and intensive use.
Suitable for floors, walls, bathrooms, kitchens and outdoor spaces.
Water-based sealer
VARNISH W is our water-based varnish designed to provide effective protection and a high-quality finish for industrial and commercial applications. Formulated for interior and exterior surfaces, this sealer stands out for its low environmental impact and low odor emissions.
Solvent-based sealer
VARNISH DSV is our solvent-based varnish formulated to provide exceptional chemical resistance for industrial and commercial applications. This sealer protects surfaces against wear, chemical corrosion and heavy traffic, making it especially suitable for high-performance environments.
FASTPROTEC is our innovative high-performance polyaspartic sealer, ideal for industrial and commercial flooring applications. It offers excellent resistance to abrasion, chemicals and UV rays, making it a durable and efficient solution.
FASTPROTEC MATT is an advanced coating formulated with polyaspartic resins and a matt finish.
Matt finish Technical data sheet
FASTPROTEC SATIN is an advanced coating formulated with polyaspartic resins and a satin finish.
Satin finish Technical data sheet
FASTPROTEC GLOSS is an advanced coating formulated with polyaspartic resins and a gloss finish.
Gloss finish Technical data sheet| Product | Technology | Finish | Base | Main use |
|---|---|---|---|---|
| VARNISH W | Polyurethane | Protective finish | Water-based | Interior - commercial protection |
| VARNISH DSV | Polyurethane | Protective finish | Solvent-based | High chemical resistance |
| FASTPROTEC MATT | Polyaspartic | Matt | High performance / Fast curing | Maximum resistance |
| FASTPROTEC SATIN | Polyaspartic | Satin | High performance / Fast curing | Maximum resistance |
| FASTPROTEC GLOSS | Polyaspartic | Gloss | High performance / Fast curing | Maximum resistance |
Technical surface preparation to ensure adhesion, consolidation and protection of our systems. Professional solutions for every substrate and requirement.
The right primer is essential for system performance and durability. It improves adhesion, regulates the substrate and helps achieve more stable, reliable finishes.
Improves the bond between the substrate and the coating, helping prevent delamination and adhesion failures.
Regulates substrate porosity to promote uniform application and more stable performance.
Strengthens weak surfaces and helps reduce the appearance of cracks and premature substrate defects.
Increases the chemical and mechanical resistance of the applied system, improving its long-term durability.
Water-based acrylic primer designed as a bonding bridge between concrete, cement mortars and gypsum.
Water-based acrylic primer with selected aggregates, designed to act as a bonding bridge on concrete, cement mortars and gypsum.
Two-component, 100% solids epoxy resin for vapour barrier, bonding bridge, priming, levelling mortar and intermediate coat.
Low-viscosity, reduced two-component epoxy primer with high penetration for substrates with residual moisture.
Low-viscosity, 100% solids epoxy resin with elongation above 100%, used as a putty or mortar.
Two-component water-based epoxy primer for concrete surfaces previously prepared by milling or shot blasting.
Three-component product made from modified epoxy resin and a water-based component with aluminised additives for osmotic barrier and waterproofing.
A quick guide to choosing the right primer according to substrate, absorption and primary technical use.
TECHNICAL SUPPORT
Our team assesses absorption, residual moisture and project requirements to recommend the most suitable surface preparation.
EXPLORE LUNIK
