ONEROCK
READY-TO-USE MICROCEMENT FOR PROFESSIONALS
ONEROCK is the Ready-to-Use Microcement System, so you can undertake your projects with the maximum guarantee of success. Its versatility and ease of work define it as the best product for any professional.
SYSTEM
The ONEROCK System is based on the superposition of layers to finish completing a waterproof, resistant and natural-looking surface.
The first layer is a consolidant of the surface that guarantees a good grip, later two layers of ONEROCK L or XL, which will give the system resistance. Once dry, apply one or two coats of the finishing microcement, either ONEROCK S or M. To finish, we recommend the use of our polyurethane varnish to facilitate cleaning of the resulting surface.
Thanks to its composition, the variations of the system are infinite, being able to even eliminate the base on fully regularized surfaces such as plasterboard.
Two of the systems most used by our clients and that Lunik recommends are shown below:
SYSTEM BASIC
PRIMER
ONEROCK L
ONEROCK L
ONEROCK S
ONEROCK S
VARNISH
VARNISH
The BASIC System is the composition that is recommended in any situation, giving an extremely resistant and highly soft finish. Get a very natural water effect.
The CONCRETE System achieves a greater hardness than the BASIC, reducing the water effect and achieving a slightly textured surface.
SYSTEM CONCRETE
PRIMER
ONEROCK L
ONEROCK L
ONEROCK M
ONEROCK M
VARNISH
VARNISH
Perfect For Professionals
ONEROCK’s Ready-to-Use Microcement is the LUNIK system with which you will achieve resistant finishes in the shortest possible time. Thanks to its formulation, all steps are facilitated and waiting times are reduced.
ONEROCK is LUNIK’s definitive system for Microcement. Its resistance to abrasion and compression recommends it for any type of surface. Its simplicity and high mechanical properties make it the best option for both interior and exterior. Its use is fully recommended for both walls and floors.
High Performance Microcement
Easy to Use
ONEROCK is LUNIK’s Microcement system with which any type of finish is achieved. More minimalist finishes, or more rustic finishes are easily achievable. No more need to have a material for every application. Welcome to simplicity.
ONEROCK is the ready-to-use Microcement system whose durability is exceptional. Both due to its own formulation and the pigments used, it will remain unaltered in the worst conditions for many years.
High Durability Ready-to-Use Microcement
Versatility
LUNIK ONEROCK Microcement can have as many finishes as you can imagine. Thanks to the different granulometries it can be applied in an infinity of textures. Thanks to this versatility, each space can be highly personalized.
LUNIK’s ONEROCK Microcement is totally waterproof. Unlike the bicomponent, its composition does not absorb water, making it perfect for all areas with moisture.
Waterproof
SYSTEM PRODUCTS
ONEROCK S
ONEROCK M
ONEROCK L
ONEROCK XL
ONEROCK S
CHARACTERISTICS
FORMAT
GRANULOMETRY
DENSITY
CONSUMPTION PER LAYER
MAX THICKNESS PER LAYER
TABER ABRASION (CS 17)
HARDNESS SHORE
15 kg
0,125 mm
1,63 g/cm³
0,3 kg/m²
0,3 mm
42 mg
45
ONEROCK S is the finest grain finish layer. With this layer you can give it the finish you want.
ONEROCK M
CHARACTERISTICS
FORMAT
GRANULOMETRY
DENSITY
CONSUMPTION PER LAYER
MAX THICKNESS PER LAYER
TABER ABRASION (CS 17)
HARDNESS SHORE
15 kg
0,20 mm
1,63 g/cm³
0,45 kg/m²
0,5 mm
42 mg
45
ONEROCK M is the finishing layer with a less fine grain size than ONEROCK S. It is the final finish for those areas that need greater hardness. Recommended for floors.
ONEROCK L
CHARACTERISTICS
FORMAT
GRANULOMETRY
DENSITY
CONSUMPTION PER LAYER
MAX THICKNESS PER LAYER
TABER ABRASION (CS 17)
HARDNESS SHORE
15 kg
0,40 mm
1,63 g/cm³
0,75 kg/m²
0,8 mm
42 mg
45
ONEROCK L is the ideal medium-grain microcement to be used as a base for those surfaces with less traffic. It is the perfect base for walls.
ONEROCK XL
CHARACTERISTICS
FORMAT
GRANULOMETRY
DENSITY
CONSUMPTION PER LAYER
MAX THICKNESS PER LAYER
TABER ABRASION (CS 17)
HARDNESS SHORE
15 kg
0,60 mm
1,65 g/cm³
1 kg/m²
1 mm
42 mg
45
ONEROCK XL is the preparation layer for the rest of the systems in case of high traffic, since it has the highest granulometry. It is the ideal support that will give the system the necessary strength.
VARNISH
Two-component product based on polyurethane resins in aqueous dispersion. It is a high-performance varnish based on 2-component aliphatic polyurethane, water-based, which provides hard and flexible coatings at the same time, with high resistance to abrasion and chemical agents.
It constitutes an excellent surface protection for floors subjected to an intense wear action.
This product does not yellow in exposure to UV rays, making it a varnish suitable for outdoor use.
FORMATO
TABER ABRASION (CS 10)
MAXIMUM ELONGATION
5 L
28 mg
35%
PRIMER
Water-based acrylic primer for permanent tacking suitable for use as a bonding bridge between concrete, cementitious mortars and plasters.
FORMAT
SOLIDS CONTENT
DRYING TIME
5 L
45%
30-45 MIN